As an Amazon Associate I earn from qualifying purchases.1. KS Tools
230mm, imperial, KS Tools 150.1345 Thread repair file
KS Tools - Two sided serviceable. Suitable for right and left handed threads. Special steelsuitable for thread pitch:24 - 10 pitch imperial". Weightkg: 0, 13. For the restoration of defective internal and external threads.
| Brand | KS Tools |
| Manufacturer | KS Tools |
| Height | 13 cm (5.12 Inches) |
| Length | 35 cm (13.78 Inches) |
| Weight | 0.13 kg (0.29 Pounds) |
| Width | 25 cm (9.84 Inches) |
| Part Number | 150.1345 |
| Model | 150.1345 |
2. RoxNvm
RoxNvm Screw Thread Gauges,Thread Gauge Metric,Stainless Steel Thread Gauges Screw Pitch Gauge,Screw Thread Pitch Cutting Gauge Tool Metric 60°20pc and Imperial 55°20pc
RoxNvm - Clear scale: the scale of this stainless Steel Screw Measuring Thread Pitch Gauge is clearly scaled, and each gauge is clearly marked for easy reading. Stainless steel material: the imperial thread gauge is made of CR stainless steel, ensuring maximum strength and durability, has good elasticity and strong rust resistance.
Thread gauge metric is resistant to aging and wear resistance, and can be used for a long time.
Practicability: this stainless steel metric Screw Pitch Thread Gauge Measuring Tool is easy to use, light and exquisite, simple in design, accurate in measurement, versatile and durable.
Small size, convenient to carry. Adjustable switch: the threaded gauge has a copper nut on one side and an adjustable switch on the other side, the measurement will not take up too much space, which can be adjusted freely. Packing includes: 1 x 05—7. 0 metric 60 degrees 20pc, 1 x 4—48 Imperial 55degrees 20pc. Very handy thread Measuring Gauge to determine the pitch of threads.
| Brand | RoxNvm |
| Manufacturer | RoxNvm |
| Height | 5 cm (1.97 Inches) |
| Length | 15 cm (5.91 Inches) |
| Width | 10 cm (3.94 Inches) |
| Part Number | AM02025611RX |
| Model | AM02025611RX |
3. Gasea
Included 58pcs Metric & Imperial & US SAE Type Caliper Gages Measuring Tool + 3pcs Center Gauges, Gasea Stainless Steel Screw Thread Pitch Cutting Gauge Tool Set
Gasea - Wide application - used for checking tool angle while cutting threads in metal turning lathes, accurately measures internal and external screw threads with thread blades of varied size.
Well maded - the toothed edges are sharply defined and the numbers are stamped and easy to read. Fuction - thread pitch gauge can be applied to measure the pitch of the thread; Center gauge apply to grind and position thread cutting tool on a lathe.
Size - 58 pcs metric & america sae type & imperial whitworth metric:025-6. 0mm, us: 8, 10, 11, 14, imperial:4g-62g, 19, 28; center gauge: 60° & 55°. Durable quality - made of stainless steel and processed with chrome finish, good resilience, it combines high strength, not easy to rust and long lasting durability.
4. YOTINO
YOTINO 4Pcs Screw Thread Gauges Screw Thread Pitch Cutting Gauge Tool Set Centre Gage 55°& 60°Inch & Metric hread Gauges
YOTINO - Function：screw thread pitch gauge is typically used to check the thread size determination is correct or not. Inch total of 28 tablets, each in accordance with the number of teeth per inch to represent the number of teeth 4-62, particularly as the number of teeth: 4/4.
5/5/6/7/8/9/10/11/12/13/14/16/18/19/20/22/24/25/26/30/28/32/36/40/48/60/62.
Very handythread measuring gauge to determine pitch of threads, all leaves are clearly etched with the size. Center gage is used to grind and position thread cutting tool on a lathe. Metric total of 24 tablets, according to the number of pitches per piece, said pitch 025-6mm, pitch count is:025/03/035/04/045/05/06/07/075/08/09/1.
| Brand | YOTINO |
| Manufacturer | YOTINO |
| Height | 1 cm (0.39 Inches) |
| Length | 10 cm (3.94 Inches) |
| Width | 4 cm (1.57 Inches) |
| Part Number | YPN0051 |
5. DEI
Thread Restorer File Metric Thread Metal Repairing File for Cleaning Internal & External Threads, 0.75-3mm Pitch
DEI - Different threads - the metric thread restorer file overs 8 different threads, 1. 25mm, 1. 5mm, and 3. 0mm, 2. 0mm, 2. 5mm, 1. 0mm, including 075mm, 1. 75mm, you can use it on metric threads according to your needs.
Application - this metric thread repair file is designed for restoring and cleaning damaged external threads on studs, screws, bolts, plumbing pipe, pipe fittings and other multiple fasteners.
Removable handle - this dual head metal file is designed with a detachable handle cover, provides a comfortable grip experience, convenient for you to use it for filing left- and right-hand threads.
Premium quality - our metric threads repair file is made of selected quality #45 steel, which is durable and has good intensity, not easy to deform, you can use it for a long time with no worries. Good helper - this external thread restorer file is a indispensible hand tool for professional riders and mechanics, but also a good helper for the everyday riders for repairing threads on your motorcycle.
6. BGS
BGS 1922 | Thread File | internal and external screw Threads | Metric 0.80, 3.00 mm
BGS - Package dimensions: 1. 8 x 8. 8 x 29 cm. Suitable for metric pitch 080 - 1. 00 - 1. 25 - 1. 50 - 1. 75 - 2. 00 - 2. 50 - 3. 00 Package weight: 015 kilograms. Made from chrome vanadium steel.
| Brand | BGS |
| Manufacturer | BGS technic KG |
| Height | 2 cm (0.79 Inches) |
| Length | 14 cm (5.51 Inches) |
| Weight | 0.13 kg (0.29 Pounds) |
| Width | 2 cm (0.79 Inches) |
| Part Number | 1922 |
| Model | 1922 |
7. TWH
Nut and Bolt Thread Checker Combo Set Metric & Imperial
TWH - All sizes are steel with a clear zinc finish and each gauge identifies both bolts and nuts. Takes the guess work out of thread size and pitch on nuts, bolts, screws, threaded holes and many other threaded items.
Eliminates costly and time consuming repairs. Each size has a nut and bolt checker on the same gauge. Nut and bolt thread checker combo Set is great for identifying and sorting nuts and bolts in fastener cribs, fastener bins at home or at your facility.
26 male/female gauges - 14 inch & 12 metric. Inch gauges are clear zinc plated, metric gauges are black oxide. The individual gauges rotate freely on the wire cable for fast thread verification. International products have separate terms, are sold from abroad and may differ from local products, age ratings, including fit, and language of product, labeling or instructions.
| Brand | TWH |
| Manufacturer | TWH |
| Height | 3 cm (1.18 Inches) |
| Length | 16 cm (6.3 Inches) |
| Weight | 0.32 kg (0.71 Pounds) |
| Width | 15.01 cm (5.91 Inches) |
| Part Number | 5UB069I244AO6G |
8. ZHENA
60°/55° Metric and Imperial Thread Pitch Cutting Gauge Screw Gauge Measuring Tool, 52 Pcs Stainless Steel Screw Thread Gauge Tool
ZHENA - Quantity: thread pitch gauge metric mm 60°，24 Pcs. Easy to use: thread pitch cutting gauge designed with a hole on each end, adjusted freely from where you press the tooth gauge, easily rotate the thread blades. Size: metric mm 60°+Whitworth-55°, thread gauge.
Precise measurement: The toothed edges are sharply defined and the numbers are stamped and easy to read. Uses: typically used to check the thread size internal and external screw et tooth pitch is correct, grind and position thread cutting tool on a lathe. Whitworth - 55°, 28 Pcs.
9. Gcroet
Thread Repair File Kit Wire Restoration Tool Metric Cleans Damaged Hardware Mini 0.75-3.0mm Black
Gcroet - Thread repair tool is not just for professional riders and mechanics, but for the everyday rider/mechanic as well. Thread repair file tool is Durable, which has fast working teeth and Removable handle. Metric thread repair file will Save time and money repairing damaged threads on multiple fasteners for your motorcycle.
Wire repair tool can Restore both right and left handed external threads easily. These indispensable thread Repair files restore damaged external threads on studs, bolts, screws, plumbing pipe and pipe fittings.
| Brand | Gcroet |
| Manufacturer | Gcroet |
| Height | 3 cm (1.18 Inches) |
| Length | 27 cm (10.63 Inches) |
| Weight | 0.2 kg (0.44 Pounds) |
| Width | 7 cm (2.76 Inches) |
| Part Number | A307 |
KS Tools - Two sided serviceable. Suitable for right and left handed threads. Special steelsuitable for thread pitch:24 - 10 pitch imperial". Weightkg: 0, 13. For the restoration of defective internal and external threads.
RoxNvm - Clear scale: the scale of this stainless Steel Screw Measuring Thread Pitch Gauge is clearly scaled, and each gauge is clearly marked for easy reading. Stainless steel material: the imperial thread gauge is made of CR stainless steel, ensuring maximum strength and durability, has good elasticity and strong rust resistance.
Gasea - Wide application - used for checking tool angle while cutting threads in metal turning lathes, accurately measures internal and external screw threads with thread blades of varied size.
DEI - Different threads - the metric thread restorer file overs 8 different threads, 1. 25mm, 1. 5mm, and 3. 0mm, 2. 0mm, 2. 5mm, 1. 0mm, including 075mm, 1. 75mm, you can use it on metric threads according to your needs.
BGS - Package dimensions: 1. 8 x 8. 8 x 29 cm. Suitable for metric pitch 080 - 1. 00 - 1. 25 - 1. 50 - 1. 75 - 2. 00 - 2. 50 - 3. 00 Package weight: 015 kilograms. Made from chrome vanadium steel.
TWH - All sizes are steel with a clear zinc finish and each gauge identifies both bolts and nuts. Takes the guess work out of thread size and pitch on nuts, bolts, screws, threaded holes and many other threaded items.
ZHENA - Quantity: thread pitch gauge metric mm 60°，24 Pcs. Easy to use: thread pitch cutting gauge designed with a hole on each end, adjusted freely from where you press the tooth gauge, easily rotate the thread blades. Size: metric mm 60°+Whitworth-55°, thread gauge. Precise measurement: The toothed edges are sharply defined and the numbers are stamped and easy to read. Uses: typically used to check the thread size internal and external screw et tooth pitch is correct, grind and position thread cutting tool on a lathe. Whitworth - 55°, 28 Pcs.
Gcroet - Thread repair tool is not just for professional riders and mechanics, but for the everyday rider/mechanic as well. Thread repair file tool is Durable, which has fast working teeth and Removable handle. Metric thread repair file will Save time and money repairing damaged threads on multiple fasteners for your motorcycle. Wire repair tool can Restore both right and left handed external threads easily. These indispensable thread Repair files restore damaged external threads on studs, bolts, screws, plumbing pipe and pipe fittings.
