Top 9 Swivel Bracket Hinge UK – Shelf Brackets & Supports

As an Amazon Associate I earn from qualifying purchases.

1. Kalolary

2PCS Folding Shelf Brackets 10 Inch, Max Load 55lb, Kalolary Heavy Duty Stainless Steel Collapsible Shelf Hinge Wall Mounted Space Saving DIY Triangle Bracket for Bench Table Bookshelf Furniture

Kalolary - When you want to collapse the table simply press the release arm. Space saving: the folding brackets can be locked at 90 degrees. Sturdy & heavy duty: made of quality stainless steel and baked black paint, allowing it to remain looking best. It can not only save more space for you in the kitchen, bathroom, boat, display racks, book shelves, shop, workshop, balcony, stores, but also can be used to make flower pot racks, room, backyard, laminate brackets, RV, trailer, garden racks, etc.

Note: folding shelf brackets do not come with hardware, you can purchase suitable screws according to your special needs. How to choose the correct size: if you want to ensure the maximum load, it is recommended that the width of the board match the length of the bracket. With solid triangle structure, do well resist daily scratches, corrosion and tarnishing, the folding brackets can hold up 55lb/25kg and secured for durable use.

The width of the partition can be selected according to the bearing capacity requirements. The load carrying capacity of the bracket will decrease as the torque increases. Excellent performance suitable for limited spaces when you want a work surface that can be folded down and out of the way. Easy to install: the folding hinge brackets are easy to install and fold, it can be installed on any kind of wall. Widely application: these folding shelf brackets are very suitable for family diy works. Hole: approximately 5mm.
BrandKalolary
ManufacturerKalolary

2. Quanerba

Grill, Folding Hinge for Home, Quanerba Pack of 2 Folding Shelf Brackets 12in Max Load 132lb Heavy Duty Outdoor, Kitchen, Office, Shelf Brackets & Supports

Quanerba - Simply press the trigger arm and fold it up if you want to create more space for other activities. Robust and durable: the folding brackets are made of burnt cold rolled steel with a smooth surface, corrosion resistance, rust and acid resistance and can be used for a long time.

The maximum load capacity of a 16 inch bracket can be up to 80 kg. It needs to be drilled during installation, so we do not recommend installing it on the surface of the tile. Widely used: take the shelf brackets at home, caravan, garage, BBQ, so you can use your own bookcase, laundry, bedroom, garden, boat, balcony, reception, raw material shelf, motorhome, storage shelf according to your wishes. You can use these brackets to extend the workbench of garage, kitchen, wall bracket, bathroom etc.

Folding console heavy load: quanerba foldable bracket is glued to the wall at a 90 degree angle. This is enough for storage at home. This is space-saving and ensures order in your room. Easy installation: the quanerba folding bracket is easy to install and fold, so you can build a foldable shelf bracket or a small wall mounted folding table for your home or garage.
BrandQuanerba
ManufacturerQuanerba
Part NumberJX-Support-16inch 400mm

3. JiGiU

JiGiU Angle Connector Flexible Hinge 30 x 30 Swivel with Clamping Lever 180° Rotatable Adjustable Zinc Alloy Joint for EU Standard 3030 Groove 8 Aluminium Profile 3D Printer Pack of 2

JiGiU - Widely used in diy project, 3D printer, stands, industrial frames, automation equipment, workbenches, etc. Tips: the load capacity of a single hinge is approx. Complete accessories: the package contains 2 pieces of European standard 3030 joint connectors and complete accessories for installation such as clamping lever, slot nut, screws, directional piece and wrench.

Improved joint connector: jigiu flexible hinge is used for moving connection between two profile sections. 40 kg. Only suitable for aluminium profiles that comply with European standards. Premium quality and durable: the body of the JiGiU joint connector is made of high-quality zinc alloy material and the handle is made of a robust aluminium alloy that sits comfortably in the hand. Worry-free after-salesif you have any questions or problems using the joint connector, please contact JiGiU 24-hour customer support.

Applicationsuitable for connecting 3030 slot 8 mm aluminium extrusion profile note: not suitable for custom aluminium profiles. Please confirm the weight of your item before use. After installing the "directional piece" into the angle joint, it must be hammered in to make it firmer. Precautions: ① with the front side of the connected aluminium profile, an 8 mm threaded hole must be inserted.
BrandJiGiU
ManufacturerJiGiU
Height4.8 cm (1.89 Inches)
Length2.9 cm (1.14 Inches)
Width2.9 cm (1.14 Inches)
ModelJGU007

4. OMIdeas

2 x Gas Strut Stay Lift Cabinet Cupboard Door Soft close Hinge 100 Nm with screws

OMIdeas - High Quality. Silver, complete with brackets and fixing screws. 100nm - suitable for 2. 1kg up to 3. 7kg door Weight. 270 mm open length / 250 mm Centres. Opening angles: 75º, 90º or 110º.
BrandOMIdeas
ManufacturerOMIdeas

5. sourcing map

Sourcing map 8 Sets Stainless Steel 360 Degree Rotating Door Pivot Hinge 57mm x 16mm

sourcing map - Design: door Pivot Hinge. Thickness: 1. 7mm / 007". Size: mounting hole diameter: 5mm / 02inch ;shaft Diameter: 7mm / 028inch. Mounting screws are not included. Note: easy to install by screws. Material: made by stainless steel, anti-corrosion.
Brandsourcing map
Manufacturersourcing map
Part Numbera18071000ux0254

6. ASelected

Max Load 50Kg, A+Selected Pack of 2 Wall Mounted Folding Shelf Brackets, 30cm X 15cm Heavy Duty Metal Foldable L Brackets

ASelected - Suitable for limited spaces when you want a work surface that can be folded down and out of the way. Made of high quality steel, sturdy and durable, ensuring quality and longevity in wet weather.

Mount hole Dia. 5mm, thickness: 3mm. Load approximately 50KG/ 110lb. Folding designed for small and medium bookshelf, exhibition stand, garden shelf, external wall brackets etc. Max. Suitable for shop, kitchen, stores, room, boats, trailer, backyard, motorhome, workshops, balcony, bathroom and household as a support bracket. The hinges lock at 90 degrees. Product dimension: 30 x 15 cm / 12 x 6 inch. When you want to collapse the table simply press the release arm.
BrandASelected
ManufacturerA+Selected
Part NumberBracket-K-Black

7. sourcing map

Pack of 2, 100mmx16mmx11mm Stainless Steel Window Door Fittings, sourcing map 360 Degree Rotatable Door Pivot Hinge

sourcing map - Applications - wide use in many different places, cabinet, such as door or window, tool box. Material - made of stainless steel, rust resistance and durable. Easy to install - screws fixed, 02"5mm mounting hole diameter. Size - 3. 94"100mm long, 063"16mm wide, 008"2mm thick. Package content - 2 x Door Hinges Mounting screws are not included.
Brandsourcing map
Manufacturersourcing map
Height10.01 cm (3.94 Inches)
Length14 cm (5.51 Inches)
Width10.01 cm (3.94 Inches)
Part Numbera18042300ux0228
Modela18042300ux0228

8. Generic

KRP1SM Bracket for Floodlight Fitting Adjustable Swivel Security Light Wall Mounted

Generic - Swivel bracket to set at your perfect angle. Made in the UK. Security light not included. Screws and wall plugs included. Ideal for home or businesses.
BrandGeneric
ManufacturerTR Solutions
Height2 cm (0.79 Inches)
Length8.5 cm (3.35 Inches)
Width12 cm (4.72 Inches)

9. DALUOBO

360 Degree Bracket Rotatable Adjustable Removable Laptop Table Leg Support for Sofa Wall or Caravan Camper Van RV Table Leg only

DALUOBO - Easy installation within minutes. Stabilize your active lifestyle with this leg System! Attention:for each handle, you need to add a washer between the handle and the frame leg or arm. To prevent you from tightening the handle, it may pull the brass nut in each handle out of the handle,Please feel free to contact us if you have any questions.

Adjustable swivel table top mount is Made of Aluminum Alloy, Corrosion and Oxidation Resistance, It is Lightweight and Durable. Does not require complicated Operations and Tools, Pieces all attach to bottom of the table base for easy to put up or take down. Freely rotate and retract to adjust the Height Where you Want it, if Preparing a Meal or Keeping up with Friends and Answering E-mails.

And easy to disassemble and assemble, boats, truck campers, vans, tear drop Trailers, Travel Trailers, Caravan, Easy storage to Save more Floor Space for Homeuse or Travel and Camping,Perfect for Your RV or Marine Boat, Motorhomes. This removable laptop table leg bracket can be rotated 360 degrees from two different positions.
BrandDALUOBO
ManufacturerDALUOBO
Height55 cm (21.65 Inches)
Length40 cm (15.75 Inches)
Weight3.7
Width25 cm (9.84 Inches)