Top 5 Stained Glass Solder Sticks UK – DIY & Tools

As an Amazon Associate I earn from qualifying purchases.

1. Kuuleyn

1pc 13cm 951 Soldering Rosin Fluxing Pens for Stained Glass Soldering Work Glass Repair and More, Flux Pen, PE Low-solids Non-sweep Solder

Kuuleyn - No residue: lux pen has a very low solid content and almost no residue, so rosin flux pen will be very convenient when you use rosin pen without worrying too much.

You can carry out corresponding applications in many places. Smooth flow: the flux flows smoothly, ensuring a safe and uniform solder connection at all times without chaos. This is a good helper for your welding work. Advantages: the rosin residue is non-conductive, moisture-proof, and anti-fungal. Scope of application: rosin flux pen set is used for rework and repair of SMT, SMD, PCB and through-hole solder joints. You can easily use rosin soldering pen. If you buy this product, soldering flux pen will be a good choice. Uses: mildly activated rosin liquid flux pen has excellent fluxing ability and can improve welding performance.
Height5 cm (1.97 Inches)
Length15 cm (5.91 Inches)
Weight0.02 kg (0.05 Pounds)
Width5 cm (1.97 Inches)
Part NumberKuuleynpyr7ufms6v

2. L&S Engineers

Per Stick, Solders Tinmans Solder Sticks Grade 'C' Approximately 1/4Kg

L&S Engineers - Trade Prices. Grade 'C'. Approximately 1/4Kg Per Stick. No quibble Returns Policy. Fast delivery From Our UK Warehouse. Solders. Tinmans solder sticks.
BrandL&S Engineers
ManufacturerL&S Engineers
Height1 cm (0.39 Inches)
Length41 cm (16.14 Inches)
Weight0.26 kg (0.57 Pounds)
Width1 cm (0.39 Inches)
Part Number845117

3. Generic

One Size, Require Solder Temperature Electrodes Powder Not Do For Soldering Aluminum Low Tools & Home Improvement 60/40 Tin Lead Solder Stained Glass Silver

Generic - The surface of the base metal must be clean. 4g. 1. The base metal temperature to reach 400 degrees, including the Process Of Welding The Base Metal Temperature Should Be Maintained At 400℃, And The Temperature Can Be High Or Low.

2. Very wide application 。it is mainly used for arc welding and filling Material For Aluminum, Chemistry, Connection With Aluminium Bus And Guide Rod Of Electrolytic Aluminium Plant And Electric Power, . Length: 500mm / 19. 7" recommended for welding or brazing aluminum alloy: 1060, 3005, 3004, 1350, 7005, 5005, 6951, 6053, 6061, 5050, 3003, And Alloys 710.0 and 711. 0 item : Approx. Material: Aluminum Color: Silver. Step 4: use propane gas to weld S Mall Object, Natural Slow Cooling After Welding.
Part Numberzyym9JloG9me

4. TermoPasty

Reball RF800, Rework, Soldering flux Liquid 50ml oiler- SMD/RMA No Clean,Reflow

TermoPasty - Flux rf 800 colophony-based flux of medium activity with excellent wetting properties. 50 ml. Application: machine soldering in professional and consumer electronics wire end tinning mixed technologies soldering passivated surfaces. It wets perfectly surfaces made of Cu or PbSn and does not require washing.
Height9 cm (3.54 Inches)
Length2.5 cm (0.98 Inches)
Width4.3 cm (1.69 Inches)

5. Amasan

Fitting Solder No. 3, Wire on Spool, Various Designs | Quality Soft Solder for Craft and Plumbing Work, Diamond BFG Solder, Alloy S-Sn97Cu3, DIN EN ISO 9453: 2014-12

Amasan - Typical base materials: any rods, copper and copper alloys, nickel and nickel alloys. Areas of application: the product can be used for soldering in various industrial sectors, such as the electrical industry, vehicle construction and sanitary industry as well as in the hobby and hobbyist sector.

Type of application: the product can be used in typical soldering processes such as flame soldering, induction soldering, resistance soldering and piston soldering. Especially recommended for soft soldering of copper pipes and copper fittings in drinking water systems cold and hot water. Product properties: quality soft solder s-sn97cu3 with very good flow properties, for hard and soft soldering, can be used with fitting soldering paste, melting range 230-250 ° C, wire on spool.

Standard conformity: the product corresponds to din en iso 9453: 2014-12 soft solders - Chemical composition and delivery forms ISO 9453: 2014; German version EN ISO 9453: 2014. The product is suitable for professional as well as private use.
Part NumberKebonds