Top 10 Tapping Drill Bit UK – Drill Bit Sets

As an Amazon Associate I earn from qualifying purchases.

1. Sirius&Co

Combination Drill and Tap Bit Set of 6 Pcs Fractional with 1/4" Hex Shank and Spiral Flute Tapping Tool Set M3-M10,Silver

Sirius&Co - Can be used on multi-spindle heads with reversing mechanisms for tapping in most materials. Suitable for low hardness materials Such as Wood, Plastic, Aluminium Plate, or Sheet Iron thickness of less than 3mm.

Metric units sliver of 6pcs:m3*05, m5*08, m8*1. 25, m4*07, m6*1. 0, m10*1. 5. Quick change 1/4"6. 35mm hex shank with metric sizes engraved on the bits. Back tapered beyond tap to prevent thread damage from over-drilling. Made of high quality hss 4341; suitable for tapping on wood, plank, plastic etc. Wide spiral flutes carry the chips out of the hole. Work very slowly and carefully with these bits when drilling metal.
BrandSirius&Co
ManufacturerSirius&Co
Part NumberNECALON

2. SIMDAO

6pcs Tap Bit Set, Titanium Coating High-Speed Steel(4341) Spiral Screw Tap,1/4" Hex Shank Combination Drill Tap Bit M3-M10 Used for Tapping Various Threads

SIMDAO - High precision: these bit set are used for one-step processing of tapping on machine tools, faster and more accurate, saving you a lot of working time and improving work efficiency.

If the drill bit cannot be cooled while drilling, the drilling should not be used frequently. Note: when drilling holes, water should be injected to cool the drill bit at the same time. Multiple models: there are 6 bit set of different sizes from m3 to m10, bit set size:m3x05, m5x08, which can be used for tapping various threads, M8x1. 25, m6x1, m4x07, m10x1. 5 shank:1/4" 6. 35 mm tap bit set. Design: the tap adopts a spiral groove design, which has a good chip removal effect. Material: spiral tap drill bit setis are made of high-speed steel, rust-proof, and the surface has been nitrided with high hardness, strong and durable.
BrandSIMDAO
ManufacturerSIMDAO
Weight0.08 kg (0.19 Pounds)
Part NumberJJ3066-605

3. DEXIDUO

DEXIDUO 6 Pack Drill Tap Set,Spiral Point Threading Taps High Speed Steel M3 M4 M5 M6 M8 M10 taps Drill Bit Set for Tapping Various Threads

DEXIDUO - Premium material:this thread Tap set is made of high-speed steel and have a nitrided surface for high hardness and rust resistance. High precision:it uses a spiral groove design and the chip cleaning process is better.

These taps are used on the machine for tapping, which is usually more accurate because it eliminates human error. Policy: do not hesitate to contact us, every problem will be solved as best as possible. M3 - m10:there are 6 different sizes of taps from m3 to M10 that can be used to tap a variety of threads. The main function:its main function is a good tool for making threads, cutting or forming a concave part of a mating pair.
BrandDEXIDUO
ManufacturerDEXIDUO
Height2 cm (0.79 Inches)
Length8 cm (3.15 Inches)
Width6 cm (2.36 Inches)
Part NumberZT513

4. YOUTHINK

6pcs Tapping Tool Screw Taps Tool Set Metric Thread M3-m10 Coated Hss Drill and Tap Bits 1/4" Hex Shank for Drilling and Cutting New Threads, Machine Tap Drill

YOUTHINK - It can be operated manually or on a machine tool. It has a simple structure and is easy to use. It is widely used in production. This tap is a tool for processing various internal and small sizes of internal threads. Simple structure, easy to operate and use: there is a total of 6 pieces of taps in different sizes from M3 to M10 that you can use for tapping various threads.

Meet your requirements for different sizes. Choose high-quality materials: these taps are made from high-speed steel and surface finished by nitriding for high hardness and rust resistance. To meet most of your needs: taps are designed with spiral flutes and the chip clearing process would be better.

Good stability: these taps are used on a machine to do the tapping, generally more accurate because human error is eliminated. Taps are the most mainstream processing tools used by manufacturing operators when tapping. High efficiency: they are taps with drilling function, used to drill a hole and cut new threads at the same time, you will have a smooth tapping experience with them. For small internal threads, a tap is almost the only tool.
BrandYOUTHINK
ManufacturerPoiy
Height1 cm (0.39 Inches)
Length8 cm (3.15 Inches)
Weight0.06 kg (0.13 Pounds)
Width6 cm (2.36 Inches)
Part NumberPoiy67yhz52xgw

5. Yosoo Health Gear

Hexagonal Handle Compound Tap Drill Bits Suitable for Drilling, Hex Shank Drill, Aluminum Plate, Tapping, Cutting on Soft Metal, Iron M6 x 1, Tap Taper Drill, Taps Drill Bits

Yosoo Health Gear - Widely applicable: the hex shank drill is suitable for drilling, cutting on soft metal, aluminum plate, iron, tapping, etc. High quality: high speed steel construction, rustproof, high hardness, solid and durable.

Easy to use: self-centering point, do not need assistant center drilling or center punching; Use of cutting coil recommended clean tap of metal chips to extend life reverse drill to back out after completing tap. Tapered tap design: drilling and tapping in one, one-step processing; Tapered tap design prevents thread damage from over-drilling. Size: the size of hex shank drill is m6 x 1 total length 58mm, spiral length 28mm, drill diameter 5. 0mm handle 6. 35mm.
BrandYosoo Health Gear
ManufacturerYosoo Health Gear
Height1 cm (0.39 Inches)
Length8 cm (3.15 Inches)
Weight0.01 kg (0.02 Pounds)
Width6 cm (2.36 Inches)
Part NumberYosoo Health Gears4if12md83

6. Yosoo Health Gear

Aluminum Plate, Tapping, Cutting on Soft Metal, Hex Shank Drill, Iron M5 x 0.8, Taps Drill Bits, Tap Taper Drill, Hexagonal Handle Compound Tap Drill Bits Suitable for Drilling

Yosoo Health Gear - Tapered tap design: drilling and tapping in one, one-step processing; Tapered tap design prevents thread damage from over-drilling. Widely applicable: the hex shank drill is suitable for drilling, cutting on soft metal, aluminum plate, tapping, iron, etc.

Size: the size of hex shank drill is m5 x 08 total length 58mm, spiral length 28mm, drill diameter 4. 2mm handle 6. 35mm. High quality: high speed steel construction, high hardness, rustproof, solid and durable. Easy to use: self-centering point, do not need assistant center drilling or center punching; Use of cutting coil recommended clean tap of metal chips to extend life reverse drill to back out after completing tap.
BrandYosoo Health Gear
ManufacturerYosoo Health Gear
Height1 cm (0.39 Inches)
Length8 cm (3.15 Inches)
Weight0.01 kg (0.02 Pounds)
Width6 cm (2.36 Inches)
Part NumberYosoo Health Gear39gtx6qr2s

7. Yosoo Health Gear

1/4'' HSS Hex Shank Drill for Tapping in Wood Plastic and Aluminum, Yosoo Health Gear M4 Combination Drill and Tap Bit

Yosoo Health Gear - Material: made from high-speed steel for long lasting strength and durability; Complete hole drilling and tapping in one operation with power drill saves labor and time. 100% satisfaction: if you have any question about this item, please feel free to contact us, we will help you within 24 hours on week days.

Material: made from high-speed steel for long lasting strength and durability; Complete hole drilling and tapping in one operation with power drill saves labor and time. 6 sizes to choose: m3 x 05, m8 x 1. 25, m4 x 07, m6 x 1, m5 x 08, m10 x 1.

5, 6 sizes can meet your different requirements; Please make sure the style before purchasing. Quick change: 1/4’’ hex shank fits into all power tools more easily and securely, it is suitable for quick change drill chunks for fast and easy swapping. Application: widely used in household DIY, woodworking, auto parts, professional machine repairing, etc.
BrandYosoo Health Gear
ManufacturerYosoo Health Gear
Height1 cm (0.39 Inches)
Length8 cm (3.15 Inches)
Weight0.01 kg (0.01 Pounds)
Width6 cm (2.36 Inches)
Part NumberYosoo Health Gearzudrtghbqy

8. panthem

6Pcs HSS 1/4" Hex Shank Tap Drill Bits Metric Thread Screw Compound Tapping Set M3-M10

panthem - Taps are designed with spiral flutes and the process of chip cleaning would be better. Uses high speed steel 6542 material, more durable, can be used for drilling the steel plate even the 2mm 304 steel plate.

There are total 6 pieces of drill taps in different sizes from M3 to M10 that you can use for tapping various threads. Applicable to some types of carbon steel and ordinary steel, copper and aluminum magnesium alloy drilling hole, tapping, cutting. Titanium Coated, higher hardness, rust-proof. Complete hole drilling, tapping and deburring/Countersinking In One Operation With Power Drill – Saves Labor and Time.
Brandpanthem
Manufacturerpanthem
Part Number00042

9. Faankiton

Drill Bit Metric Thread Tapping Tool ,HSS Drill Bits For Metal M3-M12, HSS Spiral Flute Metric Taps Set, Faankiton 7PCS Spiral Screw Thread Taps

Faankiton - Easy to cut-the spiral groove design helps to remove dirt. It is the best choice for drilling. This drill bit can bring you good cutting, high precision and high speed, high-quality thread drilling performance, so as to improve work efficiency and quality.

Chip evacuation - the threaded hole on the thread is good, there is no residue after the drill bit is running, the precision is high, the running speed is high, it can bring a smooth cutting surface, the chip removal is smooth, and the smoothness is good. High-quality drill bits - the drill is a high-quality 6542 high-speed steel twist tap with a nitride coating on the surface of the drill to prevent rust. Widely used - for threading all through hole applications in low carbon steel, aluminum, metal and wood.

Fit electric hand drill, stainless steel, copper, alloy steel, impact drill, bench drill, electric screwdriver and other tap machines. The high-quality steel makes the drill bit's cutting speed fast, high temperature resistant. Package included - tapping tool kit contains M3 M4 M5 M6 M8 M10 M12, which perfectly meet your different needs.
BrandFaankiton
ManufacturerFaankiton
Part Number002

10. Akozon

HSS Tap Drill Bit M6 1/4" Hex Shank Drill & Tap Taper Drill Bits Power Tool Part, Akozon Drill and Tap Bit, Tapping Drill Bit Set Drill Tap Bit

Akozon - Self-centering design this twist hex drill adopts self-centering design, no additional drill or center punch is needed. These are taps with drilling ability to drill and cut new threads simultaneously, giving you a smooth threading experience. If you have any questions about our products, we will answer them at any time.

Application these taps are used in threading machines and are often more accurate due to the elimination of human error. Precision manufacturing the tap is designed with a spiral groove and the chip removal process is excellent. They are taps with a drilling function, which are used to simultaneously drill and cut new threads. High quality this thread bit is made of high-speed steel, and the surface is nitrided, which has high hardness and oxidation resistance.

Application these taps are used in threading machines and are often more accurate due to the elimination of human error. They are taps with a drilling function, which are used to simultaneously drill and cut new threads. Service we are responsible for the product and believe in the quality of the product. Professional functions and high reliability bring you a different experience and ensure the satisfaction of every customer. Drilling and tapping are done at the same time, saving time and effort.
BrandAkozon
ManufacturerAkozon
Height1 cm (0.39 Inches)
Length8 cm (3.15 Inches)
Weight0.01 kg (0.02 Pounds)
Width6 cm (2.36 Inches)
Part NumberAkozongc9f1t8hkq