Top 10 Pressure Tester Plumbing UK – Power & Hand Tools

As an Amazon Associate I earn from qualifying purchases.

1. KATSU Tools

318927 Water Pipe Line Installation Heating System Leakage Pressure Tester Pump

KATSU Tools - A must tool for every plumber. Copper pump cylinder and valves, Hose length 1. 8meters. Please note the pump needs simple assembly. Copper pump body and accessories. Budget priced quality made tester.
BrandKATSU Tools
ManufacturerKATSU Tools
Part Number.

2. Dyna-Living

Dyna-Living Test Pump Water Pressure Test Pump Water Pipe Line Installation Heating System Water Leakage Pressure Tester Pump Yellow

Dyna-Living - Size: approx 30 x 18 x 26cm/ 12" x 7. 1" x 6. 3"l*w*h. Comes complete with a long hose that can stand high pressure and you can use it connect to pump and pipe directly。.

Suitable for chemical, construction, petroleum, smelting, coal, plumbing, Shipbuilding and other industries. A self-contained, portable, small size and high pressure test pump that is hand powered. Precision test pump for exact and rapid pressure testing or leak testing of pipe systems and containers in sanitary and heating technology, steam and cooling systems, oil installations, in compressed air, sprinkler installations and in boiler and pressure vessel construction. Can be using with heating, refrigeration systems, as well as water or oil-carrying pipework.

3. Deror

Water Pressure Tester Manual Pressure Test Pump Tap Water Pipe Press Testing Detector Portable Pressure Device

Deror - With water or hydraulic oil as the medium, pipelines, and also for hydraulic energy to provide the required pressure. It is suitable for chemical industry, petroleum, plumbing, shipbuilding and other industries.

The handle is thickened and not easy to break. Fine workmanship, coal, construction, good performance and durability. And the water inlet pipe and filter must be tightly sleeved to avo. During installation, the pressure relief hole must be aligned with the water discharge hole on the water tank to avoid water splashing on the ground or body when the pressure is relieved.

The manual pressure test pump has an extended handle design. It is suitable for the pressure test of various pressure vessels, valves, etc. The pressure of tap water is 01mpa and 1KG. The normal tap water pressure is 03mpa, high‑rise residential buildings are 04mpa, and the water pipe pressure is generally pressurized water pressure to 08mpa‑1. 0mpa.
Height0 cm (0 Inches)
Length0 cm (0 Inches)
Weight1.43 kg (3.15 Pounds)
Width0 cm (0 Inches)
Part NumberDeror8dtfg7p1ox

4. Caredy

Hydraulic Manual Pressure Test Pump, Metallurgy, 40KG 4MPA Manual Pressure Test Pump Pipeline Leakage Tester Hydraulic Testing Hand Tool for Construction, Plumbing

Caredy - Long operation handle makes great leverage for saving effort and reducing hand fatigue. Suitable for pressure testing of a variety of pressure vessels, valves, pipes, rubber fittings. Made of high quality iron material, surface paint spray treatment, rustproof and durable. Widely used in chemical industry, plumbing, oil, metallurgy, construction, coal, shipbuilding and other industries. Pointer type pressure gauge with clear scales for easy reading.
Height25 cm (9.84 Inches)
Length35 cm (13.78 Inches)
Weight3.35 kg (7.39 Pounds)
Width20 cm (7.87 Inches)
Part NumberCaredy7wg5qvmke2

5. Neish Tools

Neish Tools Dry Pressure Test Kit 0-4 bar

Neish Tools - Use a pump fitted with a shraeder valve. Quick pressure test prior to filling system. Uses 15mm speedfit fitting to connect to the pipework. Protective rubber boot on gauge.
BrandNeish Tools
ManufacturerNeish Tools

6. Rothenberger

Rothenberger 6.1130 Testing Pump for Domestic Pipework, 30-Bar

Rothenberger - Steel reinforced test hose, no false reading from hose bulging. Small dimensions, ideal for confined spaces. Single valve system, Simple operation. Ideally suited to domestic pipework, including testing underfloor heating systems. Container made of ABS plastic, impact resistant and non-breakable.
Height24 cm (9.45 Inches)
Length44 cm (17.32 Inches)
Weight3 kg (6.61 Pounds)
Width20 cm (7.87 Inches)
Part Number61130

7. Neish Tools

Neish Tools Mains Water Pressure Gauge 0-11bar 3/4 BSP Fitting

Neish Tools - Economy water pressure gauge. Protective rubber boot on gauge. Fitted with 3/4" bsp tap fitting 0-11bar/160psi. 10"/25cm braided stainless steel hose.
BrandNeish Tools
ManufacturerNeish Tools

8. KATSU Tools

Manual Hand Power Hydraulic 12L 0-50Bar Leakage Tester for Hot and Cold Water Pipe System Installation Inspection 318923, KATSU Pipeline Pressure Test Pump

KATSU Tools - Can be used with heating, refrigeration systems, as well as water or oil-carrying pipework. Large tank capacity of 12L/3. 17gallon 45 ml per stroke. Precise gauge which displays three units of bar/psi/MPa, maximum pressure up to 50bar/ 726psi/ 5mpa. Built with high quality brass valves and aluminium base and 2mm thickness steel tank, durable and long service life. Comes complete with a 1. 35 meter hose and R1/2 inch BSPT connector.
BrandKATSU Tools
ManufacturerKATSU Tools
Height32 cm (12.6 Inches)
Length51 cm (20.08 Inches)
Width19 cm (7.48 Inches)
Part Number318923

9. Hapivida

Hydraulic Pressure Test Pump Pipeline Tester Tool Manual Push Testing Hand Tool for Gardening Supplies

Hapivida - Excellent material:Our hydraulic pump is Iron Spray Painting, fine workmanship, durable. Widely usage:our pressure test pumps are suitable for pressure testing of various pressure vessels, valves, etc.

Pipelines, using water or hydraulic oil as the medium. Water pressure:our normal tap water pressure is 03mpa, high-rise residential building is 04mpa, water pipe pressure is generally pressurized water pressure to 08mpa-1. 0mpa. Applicable industries:our hydraulic pump is suitable for chemical, construction, coal, plumbing, petroleum, shipbuilding and other industries. They are also used for hydraulic energy to provide the required pressure. Accurate data:our pump equipped with a dial reading, the reading of the dial is clear and more convenient.
Height0 cm (0 Inches)
Length0 cm (0 Inches)
Weight1.85 kg (4.08 Pounds)
Width0 cm (0 Inches)
Part NumberHapividamt1sh2uqdv

10. Monument

Monument MON1512 1512l Pipe Dry Testing Kit

Monument - Suitable for water, air, gas and petroleum oil pipes. Test hot and cold supplies separately. Triple scale bar. Fitted with Schrader valve. Ideal for testing combi systems.
Height3 cm (1.18 Inches)
Length3 cm (1.18 Inches)
Weight0.26 kg (0.57 Pounds)
Width11.8 cm (4.65 Inches)
Part NumberMON1512
Warranty12 months.