Top 10 Part A and B UK – String Trimmer Lines

As an Amazon Associate I earn from qualifying purchases.

1. Makita

Makita Genuine B-02945 Nylon Cutting Head Adaptor/ Kit

Makita - Direct replacement For Original Part. Helps maintain Manufacturers Warranty. Genuine Makita Replacement. Exact fit. For use with makita models em2650lh, xru04z, xru09z, xux01zmr, em2650uh, em2652lhn, XRU11Z, EM400MP and EM405MP. Check owners/Operators Manual Before Fitting.
BrandMakita
ManufacturerMakita
Height15 cm (5.91 Inches)
Length30 cm (11.81 Inches)
Weight0.18 kg (0.4 Pounds)
Width30 cm (11.81 Inches)
Part NumberB-60109
ModelB-02945

2. JB Weld

J-B Weld 6 Minute Steel Epoxy & 8272UK JB8272 Marine Weld Waterproof 2 Part Epoxy Adhesives

JB Weld - Product 2: cure and set time: after mixing the tubes at a 1:1 ratio, it takes 4-6 hours to set and 16-24 hours to cure. Product 1: Sets in 6 minutes. Product 1: tensile strength of 3127 PSI. Product 2: versatile and dependable: j-b weld marineweld is steel reinforced, has a tensile strength of 5020 PSI and can withstand temperatures up to 550 degrees Fahrenheit 287 degrees Celsius.

Product 1: able to withstand temperatures up to 300ºF when fully cured. Product 1: full cure within 4-6 hours. J-b weld marineweld’s set and cure color is dark grey. When fully cured, MarineWeld is waterproof and resistant to petroleum, chemical and acid.

It retains strength above and below water. Product 2: j-b weld marineweld: a two-part epoxy cold weld system that provides strong, lasting repairs to multiple surfaces. Ideal for all DIY marine and watercraft repairs. Once cured j-b weld marineWeld can be tapped, sanded, filled, molded and drilled. Product 2: surface applications: aluminum, Fiberglass, Metal, Plastic/Composite, Wood.
BrandJB Weld

3. enjoylifelove

2 Black and Decker Workmate Part 242416-00 Workbench Leg Catch

enjoylifelove - Br>black & decker part number: 242416-00, 24241600, 242416 00 Br>by releasing this part the leg can be raised back into the up position. Br>the part will hold the leg on the Workmate in the down position and lock it in place.
Brandenjoylifelove
Manufacturerenjoylifelove

4. Intex

Intex Hose Conversion Adapter B Kit Pair Replacement Part Model Number 25009

Intex - Needed when upgrading a 1000 gph intex pump or smaller, to a 1500 GPH INTEX pump or larger. Part #: 10722/25009. Generally two adapters are needed to connect a larger pump. Pair of 2. Coverts intex pools with 1. 25" fittings to 1. 5" fittings.
BrandIntex
Manufacturerintex
Height10.16 cm (4 Inches)
Length10.16 cm (4 Inches)
Weight0.09 kg (0.19 Pounds)
Width8.89 cm (3.5 Inches)
Part Number25009E
ModelB011YPC2MI

5. JB Weld

JB Weld 8272UK JB8272 Marine Weld Waterproof 2 Part Epoxy Adhesives

JB Weld - Ideal for all DIY marine and watercraft repairs. When fully cured, chemical and acid. Versatile and dependable: j-b weld marineweld is steel reinforced, marineweld is waterproof and resistant to petroleum, has a tensile strength of 5020 PSI and can withstand temperatures up to 550 degrees Fahrenheit 287 degrees Celsius.

J-b weld marineweld’s set and cure color is dark grey. Cure and set time: after mixing the tubes at a 1:1 ratio, it takes 4-6 hours to set and 16-24 hours to cure. It retains strength above and below water. Do it yourself: big or small, you can diy it with j-b weld. J-b weld delivers superior performance, quality, and results for the World’s Strongest Bond.

Once cured j-b weld marineWeld can be tapped, filled, sanded, molded and drilled. J-b weld marineweld: a two-part epoxy cold weld system that provides strong, lasting repairs to multiple surfaces. Our heavy duty epoxy and adhesives repair and restore it right the first time. Surface applications: Aluminum, Metal, Fiberglass, Plastic/Composite, Wood.
BrandJB Weld
ManufacturerJB WELD LTD
Height3.81 cm (1.5 Inches)
Length20.32 cm (8 Inches)
Weight0.07 kg (0.15 Pounds)
Width12.7 cm (5 Inches)
Part Number8272UK
Model8272UK
WarrantyNa.

6. JB Weld

25 ml, Clear, J-B Weld 50112UK ClearWeld Quick Setting Epoxy 25ml

JB Weld - Cure colour: Clear. Clearweld quick Setting Epoxy 25ml. Clearweld quick Setting Epoxy 25ml. Set time: 5 Minutes. Clearweld quick Setting Epoxy 25ml. Cure time: 1 Hours. Strength: 3200 PSI.
BrandJB Weld
ManufacturerJB WELD
Height18.21 cm (7.17 Inches)
Length3.81 cm (1.5 Inches)
Weight0.03 kg (0.06 Pounds)
Width3.68 cm (1.45 Inches)
Part Number50112
Model50112

7. JB Weld

2oz, J-B Weld 8297 HighHeat Temperature Resistant Epoxy Putty Stick, Machine Gray

JB Weld - Easy to use; simply cut the required amount of putty, mix it by thoroughly kneading until a uniform color is reached, then press it firmly to the surface to be repaired.

J-b weld is an american company that proudly manufactures its products in the USA; when you need a repair, you need the World's Strongest Bond. Great for exhaust manifolds, engine blocks, tail pipes, mufflers, duct work, machinery, and other high temperature projects in need of a bond or a seal. Adhesive and sealant for extreme temperature applications; when you need to bond metal that gets very hot, whether it's a car muffler or an industrial repair, this is the sealer for you. Able to withstand continuous heat up to 450 degrees Fahrenheit or intermittent heat up to 500 degrees; 3 times stronger at high temperatures than conventional epoxy putties.
BrandJB Weld
ManufacturerJB WELD LTD
Height10.5 cm (4.13 Inches)
Length3 cm (1.18 Inches)
Weight0.07 kg (0.15 Pounds)
Width3 cm (1.18 Inches)
Part Number8297
Model8297

8. Spares2go

SPARES2GO 2.5m Line Spool Cover for Mac Allister MGTP18Li Strimmer Trimmer

Spares2go - Quantity: pack of 1 - Line Spool and Cover. Specification: width: 1. 5 mm, length: 2. 5m -- *please note: colour of spool and cover supplied will vary depending on supplier stock*. Premium quality, fully compatible replacement / spare part. Line spool & cover made for spARES2GO to fit Mac Allister Strimmer Trimmer. Fits models: MGTP18Li.
BrandSpares2go
ManufacturerSPARES2GO
Part Number04-STC-180

9. Stihl

Stihl Genuine 0781 120 1110 225g Gear Lubricant-B

Stihl - Check description and parts illustrated diagrams to ensure the part is a suitable replacement. Fitting original parts helps maintain manufacturer's warranty requirements. Exact fit genuine parts are designed specifically for Stihl products. Genuine stihl replacement parts guarantee durability & performance. Direct replacement for original part.
BrandStihl
ManufacturerStihl
Weight0.23 kg (0.5 Pounds)
Part Number0781 120 1110
Model0781 120 1110

10. Spares2go

SPARES2GO Strimmer Line & Spool Cover Kit for Challenge N1F-GT-220/250-C N1F-GT-250/350-B Trimmer 2 Spools

Spares2go - Product features: line diameter 1. 3mm, line length: 2 x 3. 5 metres per spool, pack contains 2 x spools + replacement cover cap, ***Please note: colour of strimmer line may vary and will arrive as either white or orange***.

2 x twin feed spool line & cover cap kit made for SPARES2GO to fit Challenge Strimmer / Trimmer. They are included as a guideline to assist you in selecting the right part for your machine**. Premium quality, fully compatible replacement / spare parts. Spring: 55mm length x 12mm outer diameter, cap hole diameter: 28mm, cap diameter: 69mm, Hole Diameter: 21mm, Cap Height Without Grooves: 30mm - **Please note: all dimensions indicated in this ad are approximate and may vary slightly from indicated measurements.

Fits models: n1f gt250-b, n1f gt250-c, n1f-gt-250/350-b, n1f gt220-c, n1f gt350-b, n1f-gt-220/250-C. Dimensions: spool diameter both sides = 49mm, spool height without knob: 18mm, knob = height: 15mm x width: 27mm.
BrandSpares2go
ManufacturerSPARES2GO
Part Number09-DJM-757