Topiky#ad - Wide applications: widely used on the motion-activated lighting, warehouses, garages and other places, corridors, bathrooms, basements, automatic exhaust ventilation fan and other electrical appliances and other functions.
Temperature Compensation: Built. Adjustable time delay: intelligent sensing, it will automatically close after a delay after the person leaves. 360 degrees cone angle detecting range: high and stable sensitivity, effectively save energy and improve efficiency.
After it is turned on within the delay period, if there is no human activity, there is a time for delaying the work for a certain period of tim. Infrared pir motion sensor: It can detect human movement by detecting infrared ray emitted by human body.
Intelligent brightness sensor: it adopts photosensitive control, it will not turn on the light during the daytime or strong light environment, or you can choose to turn on the light during the any light environment. Temperature compensation: Built-in temperature compensation chip, reducing the impact sensing distance by the temperature.
AirTech-UK#ad - It can automatically recognize the daylight and night. The load can be opened immediately when someone enters into the detection area. Adopting infrared energy remitted by human as well as the signal resource.
Using high-sensitivity detectors and integrated circuit. This is a new energy-saving switch. It combines automatic, convenience, security, energy saving with practicality. Easy installation and wide range of application.
Loops#ad - Lux – our occupancy sensors have a lux setting which will only allow your lights to be turned on when a light level falls below are certain point & when motion is detected.
If required, more than one of these pir switches can be linked in parallel to make a circuit live, this could be useful at the top and bottom of a stair case… Or in a larger space when all lights in that space need to be turned on at the same time, no matter where motion is detected in that space.
Our occupancy sensors will constantly reset their timer providing someone is within the sensors range. Occpancy – with traditional pir’s, once the timer has started, that’s it, you would then have to wave your hand or move when the light goes off to reset the light which can be frustrating. Detection radius – 360 degrees | detection range – 6m max
Menzs#ad - Superb suction power with 130m³/h and low noise level of only 43dB, with IPX2 waterproof capability. The new human body motion sensor switch design, it will automatically start when a person approaches, get rid of the trouble of switching, and the sensing distance can be adjusted and the delay is closed.
Double insulated, no earth wire required, quick and easy to install. Rated maximum voltage: 220-240v, rated power: 50hz. Can be mounted on walls, glass or ceilings requires removal of the dampers and used in many locations in the home.
#adBlauberg UK#ad - This is one of the highest extraction rates for any 4" axial fan. Extract rate :an impressive 27 litres per second, 97 cubic metres per hour. Power Consumption: 7. 5 watts. Spigot is 99mm diameter for connection to 100mm ducting and projects for 80mm beyond installed surface.
Sound output: german engineered design with anti vibration mounts ensures quiet low noise, only 25 dBA hush sound level.
This is one of the quietest fans in the market. Stylish 100mm 4" designer bathroom, kitchen extractor fan. Specially designed mixed-flow impeller ensures high airflow and low noise level.
Fitted with an anti back draft shutter. Dimensions: 158mm wide x 158mm high. Run-on timer adjustable from 2 to 30 minutes. German blauberg motor backed with a 5 year warranty. Movement detection angle up to 100 degrees. Fitted with a built-in pir movement detector. Movement detection range from 1 to 4km.
Yosoo Health Gear#ad - Usb port supply: usb port make it convenient and simple to standby; Power supply via mobile phone, Output voltage is equal to input voltage, charging bank or other devices with USB port, low power consumption. Widely applicable: the sensor switch led is widely used on the motion-activated lighting, basements, warehouses, bathrooms, for automatic lighting corridors, garages and other places.
The sensor switch led with PIR motion sensor, it can detect human movement by detecting infrared ray emitted by human body.
High and stable sensitivity: 120 degrees cone angle detecting range, high and stable sensitivity, effectively save energy and improve efficiency. The sensor switch led with PIR motion sensor, it can detect human movement by detecting infrared ray emitted by human body.
The sensor switch led with PIR motion sensor, it can detect human movement by detecting infrared ray emitted by human body. Intelligent sensing: built-in temperature compensation chip, reducing the impact sensing distance by the temperature; Intelligent sensing, it will automatically delay to shut down after the person leaves. The sensor switch led with PIR motion sensor, it can detect human movement by detecting infrared ray emitted by human body.
Usb port make it convenient and simple to standby. Built-in temperature compensation chip, Output voltage is equal to input voltage, reducing the impact s. With pir motion sensor, it can detect human movement by detecting infrared ray emitted by human body. Intelligent sensing, it will automatically delay to shut down after the person leaves.
QWYEURO#ad - Can identify day and night: the consumer can adjust work ambient light. Time–delay is adjustable:it can be set according to the consumer’s desire. The maximum is 7min±2min. The qwyeuro advantage:high-quality switches specially designed for the home, and the lights go off when people walk off, the lights come on when people come, reducing energy waste.
What you get:qwyeuro infrared motion sensor，instruction manual，screws with dowels，12-month warranty，and friendly customer service.
Time-delay is added continually: when it receives the second induction signals after the first induction, it will compute time once more on the basic of the first time-delay rest.
It can work in the ambient light less than 10LUX when it is adjusted on the “moon” position min. It can work in the daytime and at night when it is adjusted on the “sun” position max. As for the adjustment pattern, please refer to the testing pattern. The minimum time is 10sec±3sec.