As an Amazon Associate I earn from qualifying purchases.
1. Plumb Pak
Pack of 2, Plumb-Pak PF96-2AMZ Compression Flexible Tap Connector 22mm x 3/4inch x 300mmPlumb Pak
- Suitable for use with hot and cold water. Easy to install no specialist tools required. For use where a rigid pipe is not suitable.
2. PSW TRADE SUPPLIERS LTD
Straight Adaptor UK PSW TRADE SUPPLIERS LTD Pack of 2, 22 mm x 3/4" Compression x BSP MalePSW TRADE SUPPLIERS LTD
- Operating parameters gas: 1 bar at 30°C, compressed air: 7 bar at 30°C. Suitable for gas, compressed air and water applications. Permanently tight connection without special tools.
Operating parameters water: 15mm, 25 bar at 0-95°C. Manufactured from high quality brass material, fittings are compatible with low carbon steel, stainless steel and a range of plastic pipe.
3. LP Supplies
22mm x 3/4" Parallel Male AdapterLP Supplies
- Suitable for use on hot, cold, central heating and gas pipework. Compression 22mm x 3/4" male iron connects 22mm pipe to a 3/4" female fitting.
Easy to install with minimal tools. A brass 22mm compression fitting including olive to 3/4" BSP male thread. 1 x compression brass 22mm x 3/4 inch male iron adaptor.
4. UKDeals Direct
Pack of 2, WRAS Approved, UKDD® 22mm Compression by 3/4" BSP Brass Female Iron Coupler, 22mm x 3/4" Adaptors StraightUKDeals Direct
- Compliant with relevant standards - EN1254. Suitable for hot and cold drinking water, heating and chilled water systems. 3/4" female straight iron wras approved - to 22mm Copper or Poly Barrier Pipe. Pack of 2. 22mm x 3/4" female Brass compression Straight coupler.
|Height||3 cm (1.18 Inches)|
|Length||3 cm (1.18 Inches)|
|Width||3 cm (1.18 Inches)|
5. Plumb Pak
Plumb-Pak PF257-2AMZ Compression Flexible Tap Connector 22mm x 3/4inch with an Isolator Valve, Pack of 2Plumb Pak
- Built in isolating valve enables water supply to be shut off and on. Easy to install no specialist tools required. Suitable for use with hot and cold water. Washers Included. For use where a rigid pipe is not suitable.
Aumix x2 Pair 15mm x 3/4” inch 12mm Bore 300mm Flexible Braided Pipe Tap Connector Hose WRAS ApprovedAumix
- Important sizing note - most plumbing products are measured using bsp thread dimensions which measure 1/4 inch larger than that stated, therefore this 3/4 Inch BSP thread actually measures 1 Inch in diameter.
You will receive x2 15mm x 3/4” inch 12mm Bore 300mm Flexible Tap Connectors. If your thread measures 3/4 Inch in diameter then you require the 1/2 Inch version of this product.
One side is 15mm the other is ¾” inch with a 12mm bore with a length of 300mm made from Flexible Braided from the highest quality grade 304 long life stainless steel braided flexible hoses, which is highly durable.
Wras approved - wras, which stands for water regulations advisory scheme, is a certification mark that demonstrates that an item or package complies with the high standards set out by water regulations. This flexible braided Pipe Tap Connector Hose is perfect for connecting pipes to taps. Wras approval is accepted by every water supplier in the UK.
7. Plumb Pak
Plumb Pak PF25750 22mm x 3/4-inch x 500mm/ 9.5mm Standard Bore Flexible Iso Vale Tap ConnectorPlumb Pak
- Item package quantity: 1. Suitable for use on Both Hot and Cold Taps. Being made of Brass they are Durable and Reliable. Most commonly used on Sinks and Basin.
|Height||2.2 cm (0.87 Inches)|
|Length||50 cm (19.69 Inches)|
|Weight||0.26 kg (0.58 Pounds)|
|Width||1.9 cm (0.75 Inches)|
8. Plumb Pak
Pack of 3, Plumb-Pak PF02-3AMZ Compression Straight Coupler 22mmPlumb Pak
- Suitable for use on hot, cold and central heating pipework. Easy to install. Brass compression fitting.
HYDROBIL Brass Bush BSP Reducing Connector | 1" x 1/2" Thread | for Hot Water & Central Heating Systems | Pipe Installation Improvement | Resistant to Mechanical DamageHYDROBIL
- Versatile & convenient: this bush reducing connector will prove useful during the installation or repair of the water mains and central heating systems. Thanks to that, fuel, water, oil and non-aggressive liquids. Maximum working temperature: 95°C. Before purchasing, please check the product dimensions and watch the animation showing how to match the product thread to the existing installation.
Thanks to that, it won’t distort nor lose its functional properties due to the constant use. Indoors & outdoors: thanks to its high resistance to the unfavorable external factors, this type of fitting can be used not only in the buildings, but also as a part of the outdoor installations.
Technical information: size of inner and outer thread: 1" x 1/2". It won’t get corroded with time.
Rustproof: brass is resistant to corrosion, this product is suitable for air, gas, even when in constant contact with water. It will ensure a proper liquid circulation in the pipes, thus improving the functioning of the whole installation. Maximum working pressure: 10 Bar 1, 0 MPa. Product dimensions: 33 x 33 x 26 mm. Highly resistant: being made of brass, this product is resistant to the high temperatures and mechanical damage. You can easily mount it on your own using a wrench.
|Height||2.6 cm (1.02 Inches)|
|Length||3.3 cm (1.3 Inches)|
|Weight||0.04 kg (0.09 Pounds)|
|Width||3.3 cm (1.3 Inches)|
Pack of 2, 22mm x 3/4 Inch BSP Female Chrome AdaptorPrimaflow
- This listing is for a Pack of 2. If your thread measures 3/4 Inch in diameter then you require the 1/2 Inch version of this product. Important sizing note - most plumbing products are measured using bsp thread dimensions which measure 1/4 inch larger than that stated, therefore this 3/4 Inch BSP thread actually measures 1 Inch in diameter.
Manufactured to meet BS EN 1254-2. Spanner size - approx 30mm. This product is available in singles, as well as more cost effective multiples of 2, 5 and 10 from our store.